DrayTek Vigor 130 VDSL2/ADSL2+ (FTTC/BT Infinity) Gigabit Ethernet Modem

Product Information

The Vigor 130 provides compatibility with all current UK VDSL/ADSL technologies; it has been extensively tested and tuned to provide a robust and reliable DSL connection.

Vigor130 | DrayTek Vigor130 | DrayTek

This transparent bridging method also differs from using a normal ADSL/VDSL router which logs in itself and then uses NAT or multiple public IP addresses to create an onward client connection for your secondary device; that is not IP Address thrifty and can introduce secondary NAT compromises or interference with various protocols/traffic. We would also take this opportunity to remind you that they should have a regular program of checking and updating product firmware even when there isn't a specific announcement like this one. Upon restarting, the modem will no longer provide an IP address through DHCP, which is required by the MPoA Bridge Mode configuration, for full bridging to take place.I have had the setup nearly two years and only had one issue and it wasn't speed related hence why I changed the firmware of both the WRT32X and Linksys E600 to WRT versions. But when I go to check in the talktalk admin settings it says I'm connected but not to the internet. These steps need to be completed before 2021-05-22 or the WCF and DrayDDNS services may not work as expected.

Vigor130 in Bridge Mode | DrayTek Access a Vigor130 in Bridge Mode | DrayTek

You may get a warning about your server (the router) having an invalid certificate and your browser will demand further confirmation or exception before allowing access. To do this, plug a laptop or PC into the LAN port of the modem and wait for it to receive an IP address.Most ISPs currently use PPPoE connections with the FTTC service and this guide will cover the configuration of that on a DrayTek router with an Ethernet WAN interface.

Vigor 130 - Using VLAN tag on Router instead of Modem - DrayTek Vigor 130 - Using VLAN tag on Router instead of Modem - DrayTek

The https:// prefix ensures that your connection is encrypted using SSL so that your session data cannot be intercepted.If it's going to be used to connect a router without its own modem, the Vigor 130 and Vigor 166 are ideal, they work as VDSL / G. NFEC This parameter reports the actual Reed-Solomon codeword size in bytes used in the latency path in which the bearer channel is transported. Once you have the appropriate firmware file for your product, you can upgrade from the 'system maintenance' menu in the web interface - but do always take a configuration backup first (from that same menu).